ProCon GSM - Contact controlled industrial GSM transmitter
5 contact inputs, 1 NO/NC relay output
Sending SMS, voice message, Contact ID
Controllable by SMS and voice call from 1000 phone number
Programming via SMS, PC, Android and voice menu
The system forwards SMS and/or voice message and/or Contact ID to the user and/or the monitoring station if a signal reaches the input. You can set 8 different phone numbers to specify separately the type of notice. Event notification: input alarm, tamper, external power monitoring, life signal sending. SMS message can be set individually or depending by the alarm event or from the restore. The ringing time of the call, the redial of the number and the function of the circular calling can be set separately
The output can be controlled by a free voice call : unlimited number of cases (no checking) or with caller ID checking up to the build in memory (1000 pcs) and the memory of SIM card. The output can be monostable (max. 65000 sec) or bistable.
If you want to use it like an alarm control panel the input will be the zone and the output will control the siren, while the phone call will manage to arm/disarm the system.
The module can be programmed via SMS, voice menu, PC (USB or Bluetooth) and Android.
SIM function expiring date, maintenance warning. The memory of the module can store 16 000 events.
The tamper input on the module can be used to connect sabotage indicator with setting possibilities alike to inputs. Shortening it before powering on then cut short after 3 seconds functions as a ’’reset’’ that can revert the module back to its original factory state.
The battery allows the device to send signal of a power failure and to operate for 24 hours.
The battery pack allows the device to have a signal about a power failure and to operate for 24 hours.
Expansion modules: relay output panel, alarm control panel, temperature control panel.
Inputs (+ expander): 5 (+1)
Relay outputs (+ expander): 1 (+3)
Relay output rated current max: 30V@500mA
OC outputs (+ expander): (+1)
OC output rated currentmax: 30V@400mA
User phone numbers for event transmission: 8
User phone numbers for output control: unlimited / 1000 numbers
Individual reporting to the monitoring station
User phone numbers for incoming SMS forward: 1
Transmission channel: GSM / SMS / GPRS
Caller identification: yes
Alarm control panel mode: (arm/disarm - entry/exit delay)
Configurable 24h zones
Adjustable zone sensitivity
Configurable inputs (NO/NC)
Individual SMS sending to user phone numbers with adjustable text
Monitoring station phone numbers: 2
Periodic test report sending
Recordable voice message sending to user phone numbers: 6(+1)
Alarm transmission to user phone numbers using siren tone
Event list / number of stored events: 16000
GSM signal strengh monitoring and logging hourly
SMS converting and sending to user phone numbers from filtered Contact ID codes (250 events and 250 zones distinguish)
Configurable internal Contact ID codes
Phone line simulation
PSTN phone line monitoring
Output activation with free GSM call
Programming software: (PC, Android)
Programming method: USB / SMS / Bluetooth
Battery connection options: yes
Current (Nominal / GSM broadcast): 30mA/700mA
Simulated line/ring voltage
Supply voltage range: 9-20 VDC
GSM/GPRS transmitter beside alarm system
Independent alarm system
Vocal alarm messages
Gate, barrier, and garage opening
House automation control (air-conditioning, heating, sauna, lighting)
230V control and sending notification
Restarting and controlling servers
Supply voltage: 9-20 VDc
Standby current: 30 mA
Maximum current consumption: 700 mA
Relay output: max. 20V@500 mA
GSM module type: 900 SIMCOM
GSM frequencies: GSM 850 / EGSM 900 / DCS 1800 / PCS 1900 (Multi-Band)
SIM interface: unlocked, support for all services
GSM antenna type: SMA connector (included)
Dimensions: 78 x 51 x 20 mm, packed: 132 x 128 x 32 mm
Operating temperature: -20°C - +50°C