B214GPRS - GSM remote control with PC and Internet setting
The GSM remote control B214GPRS a wireless gsm remote control switch that connects to the GSM cell phone network.
It has four independent relay switches, and two relay 230V/10A.
Relay switch is activated by calling its cell phone number, it will reject the call without answering and switch on the device connected to it,then there are no call costs incurred when dialling the unit, it will recognize an authorized telephone number calling it and reject the call without answering.
Relays can be switched by SMS as well.
Now we added new features as follows:
2048 authorized phone numbers
History: 680 events
Calendar: you can setup every day time interval, when it is possible to use B214.
It is possible to control B214 directly from PC.
Authorized phone number: 2048
History: 680 events
Calendar: for every day during the week
Direct output control from PC: Yes
USB connector included
Installed inside box with covering IP65
power supply 230V or 12V (DC or AC)
2 pcs relays 230V/10A
electronic protection against reversing of polarity
USB connector included.
Internet setting via GPRS – you can set or watch all parameters from anywhere
Event history – 256 last events
Possibility to upgrade new firmware
How can you setup all parameters?
You can choose from three possibilities.
1. DIP switch setting (the simplest in the world).
push switch 1 on the DIP switch to ON, call in the SIM card inside GSM remote control and your phone number will be saved automatically.
If you move switch 2 to ON position, it means, when you will ring to GSM remote control SIM card, it will automatically hang up and switch relay 1.
If you move switch 3 to ON position, it means, when you will ring to GSM remote control SIM card, it will automatically hang up and switch relay 2.
If you move both switch 2 and 3 to ON position, it means, when you will ring to GSM remote control SIM card, it will automatically hang up and switch relay 1 and relay 2.
If you move switch 4 to ON position, it means, that when anybody calls in the GSM remote control you will get SMS as follows: "Device name: switch-over from number +420 777753500 date:8.5.2014 14:05:47"
2. Setting by SMS commands (see the manual).
Setting phone number using SMS command
Deleting phone number using SMS command
Switch ON/OFF any relay
3. Setting by PC software using the PC interface program
4. Setting by Internet
Windows: XP, Windows 7, Windows 8, Windows 10
Power supply: 230V
Power supply 2: 10 -18V DC or 8 - 12V AC (automatical reversing of polarity protection)
Phone numbers: 1 000
Relay number : 2 (230V/10A with change-over contacts NO and NC)
Setting relay time switching: 0 - 32768 seconds (if 0, than first ringing will switch relay ON and second one will switch relay OFF)
GSM frequency: 850/900/1800/1900MHz
Working temperature: -20 C ….. +50 C